YJYM Super Power 900W 808nm 755nm 1064nm Three Wavelengths Diode Laser Hair Removal Machine Fast Permanent Freezing Painless

Product description

wavelength：755nm,808nm,1064nm

Working frequency：1~10hz

Energy density：1-120j/cm2

Handle piece cooling：TEC+sapphire

TEC cooling：12V 6A

Spot size：10cm×10cm 、15cm×15cm or 25 x31mm

Output power：900W

Laser bars：Germany laser Jenoptik,150W/piece

Pulse width：5ms~400ms

Output mode：Pulse output

Language：Standard English

display：8’ color touch screen

Protective temperature：55℃ interface select

Water pump：DP-60 diaphragm rods 12V

Flow sensor：At least 3.5L/min

Water level switch：Test water level

Cooling system：240×120cooling line(2pc),18 pcs channel

Cooling fan：4pcs fans,speed 3150r/min

Case material：ABS shell/metal shell

Inter structure：White zinc hob/color zinc hob

Water tank volume：vertical3.6L/table type 2.5L

Environmental moisture：< 80% Environment temperature：Air conditioning room,temperature≤35℃ voltage：220V, 110V

Treatment Principle

laser machine for hair removal is performed using gold standard 755nm,  808nm and 1064nm laser technology, with energy penetrates deep into the dermis with high average power and a rapid 5 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.
Meanwhile, contacting surface cooling technology applied on the Sapphire Dual-ChillTip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.

Advantages

Skin cooling system before,during and after treatment provide skin cooling to protect the skin and reduce the initial temperature of the skin. This can reduce the discomfort of the patient. The most important is that without increase of side effects and pain, the treatment energy can be adjusted to higher, and the treatment will be faster and better.

Dense hairs (30-40 hairs per cm2) will produce a higher temperature because there is more melanin in them . Excessive heat of surrounding tissue is likely to cause tissue damage. Therefore, the greater the density of hair is, the lower the energy should be.

Laser provides you with some default energy settings according to different areas and skin types. Pulse width is controlled automatically by program according to plenty of experiments and clinical trials.

Laser machine for hair removal comes with new technology combined 3 wavelength, as follow:

* 755nm lase:  for  thin hair  removal like and effective for hair of  light skin color,  like lips around hair, eyebrow and so on.
*808nm  laser : for almost most hair r emoval.
*1064nm laser: for hair of deep layer, the energy can go to deeper into the skin, so effect is very good for brown hair and deeper skin patients.